Before you download and install inSync Connector, ensure you meet the following pre-requisites.
Pre-requisites
Hardware Prerequisites
The following table lists the hardware prerequisites to install inSync Connector.
The connector's footprint is very low, which means that almost any hardware can support the Connector.
Hardware | Minimum Requirements |
CPU | 1 GHz or faster |
RAM | 2 GB |
Disk Space | 16 GB |
Software Prerequisites
The following table lists the software prerequisites to install inSync Connector.
Software | Minimum Requirements |
Operating system | Windows
|
📝 Note
If you have installed the previous version of the inSync Connector (see EOL Policy ) on a 32-bit Windows computer, you cannot upgrade your inSync Connector. You must install and configure the latest inSync Connector.
Port Usage
The following table lists the ports that the inSync Connector uses.
Port Number | Used By |
443, 6061, 80 | inSync Connector with inSync Cloud
📝 Note
If you want to use port 443 for the inSync Connector, contact Druva Support.
|
389 | LDAP |
3268 | LDAP on global catalog |
636 | Secure LDAP |
3269 | Secure LDAP on global catalog |
Download inSync Connector
To download the latest version of inSync Connector,
Open a browser on the computer where you want to install inSync Connector.
Log on to inSync Management Console.
On the inSync Management Console menu bar, click on the settings icon > Downloads.
Select AD/LDAP Connector from the list and click Download.
Install inSync Connector
To install inSync Connector,
Double-click the installer. The installation wizard appears.
Enter the appropriate information on the wizard and complete the installation procedure.
The inSync Connector is installed. You can now configure the connector. For more information, see Configure the inSync Connector.
Upgrade inSync Connector
To upgrade inSync Connector
Open a browser on the computer where you have the inSync Connector installed.
Log on to inSync Management Console.
On the inSync Management Console menu bar, click on the settings icon > inSync Settings.
Click the Connectors tab.
In the Connectors area, click the Download and install Connector link.
After you download the inSync Connector installer, double-click the installer. The installation wizard appears.
Enter the appropriate information on the wizard and complete the upgrade procedure.
The inSync Connector is upgraded and functional. You do not need to reconfigure the inSync Connector.