Skip to main content
Monitor file server jobs
Updated over 3 months ago

The All Jobs page displays a list of all backup, restore, defreeze, and log request jobs. You can monitor the progress of each File Server job. Additionally, job details are accessible for all listed tasks. Upon navigating to the job details page, you can delve into specific job details and review associated logs.

To access the File Servers All Jobs page, perform the following tasks:

  1. Log in to the Management Console.

  2. Select the workload from the Protect menu. Note that if the All Organizations menu is enabled, you have to first select an organization and then select the workload.

  3. In the navigation pane on the left, click Jobs. The right pane displays the following data:

Field

Description

Job ID

A unique identification number associated with the job.

Job Type

The type of job operation, such as Backup, Restore, Defreeze, Log Request.

Backup Set

Name of the FS backup set for which the job was created.

Start time

The time when the job started.

End time

The time when the job ended.

Status

The status of the job. For more information, see Job Status.

Filters

You can filter jobs by Job Type, Status, and Started in.

Jobs_FS.png

Job Type

You can filter jobs by the following Job Types:

  • Backup

  • Restore

  • Defreeze

  • Log Request

You can filter jobs by Status:

Status

The Status filter allows you to filter jobs based on their statuses.

  • Queued (1): The triggered jobs that are waiting to be processed.

  • Running (2): The jobs that are being processed.
    โ€‹
    During backup job for a File server, one of the following statuses is displayed:

    • The estimated data to be backed up and the total number of files scanned is displayed.
      E.g: "472 MB estimated:6097 files scanned"

    • After the estimation is completed, the percentage of data uploaded to the cloud is displayed.

  • Successful (3): The jobs processed without any errors.

  • Successful with errors (4): The jobs that are processed but have some errors.

  • Failed (5): The jobs that were not processed successfully.

Note: A failed job is displayed with an error code. Hover on the error code to view the error message. The error code hyperlink redirects to the exact error message description on the documentation portal.

  • Canceled (6): The jobs that were canceled.

  • Waiting for Retry (7): The jobs that failed in the previous attempt and waiting to be processed again.

    Note: By default, Druva retries a job twice with a ten-minute interval between the two attempts.

    The Backup Retry feature ensures the following:

    • Higher backup success rate, if a backup is failing due to transient issues in your environment.

    • Optimum utilization of the scheduled window.

    The backup retry for a job is performed only if a job fails. Druva does not perform backup retry for jobs that have successfully finished but with errors.

    An automatic job retry is not triggered for a manually triggered job.

  • Skipped (8): The jobs that did not start within the scheduled window because another job is in progress.

  • Backup window expired (9): The list of jobs Druva could not complete because the entire data set was not backed up within the specified duration, and a recovery point was not created.

  • Scanning (13): The jobs that are still being scanned.

  • Scan failed (14): The jobs for which the scan has failed.

You can also filter jobs that Started in:

  • Last 24 hours

  • Last 7 days

  • Last 1 month

  • Custom dateNote: You can choose a specific date range.

The Job ID and the Backup Set values are clickable. Clicking the Job ID value for an FS job takes you to the job details page. Clicking the value in the Backup Set tab takes you to the backup set details page.

From the Jobs page within the Protect > File Servers page, click the Job ID of the job whose details you want to view. The jobs details page is divided into the Details tab, and the Logs tab.

Job Details

The Job Details section has the following fields:

Field

Description

Job Type

The type of job that was executed. This can be backup, restore, defreeze, or log request.

Backup Set Type

The type of server that was backed up. For File Servers, the backup set type is File.

Start Time

The time when the job started.

Pre Script Status

The status of the execution of the pre-backup script. The status can be one of the following:

  • Successful (1): The pre-backup script execution succeeded.

  • Failed (2): The pre-backup script execution failed.

  • Skipped (3): The pre-backup script execution skips when the pre-backup script is unavailable at the configured location.

  • Not enabled (4): The pre-backup script was disabled for execution.

  • Failed with timeout (5): The pre-backup script execution failed on time out.

Server

The file server on which the backup was initiated.

Backup Policy

The Backup Policy associated with the backup set.

End Time

The time when the job ended.

Post Script Status

The status of the execution of the post-backup script.The status can be one of the following:

  • Successful (1): The post-backup script execution succeeded.

  • Failed (2): The post-backup script execution failed.

  • Skipped (3): The post-backup script execution skips when the post-backup script is unavailable at the configured location.

  • Not enabled (4): The post-backup script was disabled for execution.

  • Failed with timeout (5): The post-backup script execution failed on time out.

Status

Completion status of the job.

Backup Content

The directories and folders that were backed up.

Scan Mode

The type of scan conducted which is either a Folder Walk, or a USN Journal Scan.

Data Estimation

The data estimation section has the following fields:

Field

Description

Source Data Scanned

The amount of data scanned at the source for the backup.

#Files Scanned

The total number of files scanned.

#Files Changed

The total number of files that changed as compared to the previous backup.

#Files Added

The total number of files that were added as compared to the previous backup.

#Files Removed

The total number of files that were removed as compared to the previous backup.

Time taken for estimation

The approximate time taken to scan the data. The time taken for estimation does not include network retry time.

File Size Distribution

The percentage of the files backed up based on their sizes. The percentages are marked with the following file size ranges:

  • 0-1KB

  • >1-10KB

  • >10-100KB

  • >100KB-1MB

  • >1-16MB

  • >16MB

Data Transfer

The Data Transfer section has the following details:

Field

Description

Data Transferred to Cloud

The incremental data that is directly uploaded to Cloud after deduplication and compression.

Data Transferred to CloudCache

The incremental data that is directly uploaded to CloudCache after deduplication and compression.

Backup Duration

The total time taken to upload data to Cloud and CloudCache. Backup duration excludes the estimation time, network retry time, and the waiting for retry time.

Backup Speed

The rate at which the source data is scanned for backup.

Bandwidth Consumed

The bit rate to transfer data to cloud and CloudCache.

Environment Details

The Environment Details section has the following details:

Field

Description

Disk Read Rate

The bit rate for reading I/O by the agent. The Disk Read Rate is an average of the total data read and the total time taken to read data at various intervals for all drives where data is distributed. For UNC Shares, the Disk Read Rate is the average value of drive(s).

#Network Retries

The number of network retry attempts made within a job session.

Network Retry Duration

The total time spent in network retries. It is cumulative of all network session duration.

Monitor file server logs

Log files help analyze and troubleshoot issues encountered while performing a task. You can share the logs with Druva Technical Support to aid in issue resolution.

Progress Logs

Displays the progress logs of the job.

Detailed Logs

The Detailed Logs section gives you the option to Request Detailed Logs. Detailed logs are available only after the upload job completes. Till then, the Download Detailed Logs button remains disabled. The logs are available for download till a certain date and time specified under the Available for download till field. The Requested on field shows you when the request for detailed logs was made.

Upload requested logs

The log files are used to analyze and troubleshoot the issues you might encounter while performing a task. For assistance in resolving the issues, you can share the log files with technical support. The job details are displayed in the Management Console for the last 180 days.

Note: Process logs are only available for backup and restore jobs.

Detailed logs for jobs are available for Hybrid Workloads agent / Enterprise Workloads agent. The detailed logs include the following:

Common logs for Window, Linux, and backup proxy

Window logs

Linux logs

Backup proxy logs

Druva Phoenix Config

Window event/Application logs

Dmesg logs

VMware logs

Agent-specific Logs

VSS information

System information

Main Service logs

You can request job logs within 30 days of triggering the job. You must download the requested logs within 7 days of triggering the request. The job details are available in the Management Console for the last 180 days.

Note: If you execute a job on Hybrid Workloads agent (version prior to 7.0.0) and then upgrade to Enterprise Workloads agent (version 7.0.0 and later) before downloading the logs, you will see the Request Job Logs option on the Detailed Logs tab of the Job Details page. However, clicking this button will still fetch the server logs for the job executed before the client upgrade.

You can request job logs within 30 days of triggering the job. You must download the requested logs within 7 days of triggering the request.If the log file is 4.5 MB or smaller, you can send it to technical support as an email attachment. If the log file exceeds 4.5 MB in size, perform the following tasks to send the logs to support:

  1. Enter the case number in the Ticket Number field.

  2. Click Choose File, and add the compressed files to upload.

  3. Click Upload. Notify the support engineer that the logs have been uploaded on the portal by responding to the ongoing support ticket email.

Did this answer your question?