The following table lists the system requirements for deploying CloudCache.
📝 Note
The prerequisites for CloudCache depend on factors such as the size of backup data and the number of backup sets that are mapped to the CloudCache. To know the exact prerequisites for your setup, contact Support.
Software requirements
The following table lists the system requirements for deploying CloudCache.
CloudCache R1 software requirements
Operating system | Editions |
Linux | Linux CloudCache can be deployed using an OVA for vCenter.
Version: vCenter Server Standard 8.0, 7.0,6.7,6.5 |
CloudCache R3 software requirements
Operating system | Editions |
Linux | Linux CloudCache can be deployed using the following:
|
Hardware requirements
CloudCache R1 hardware requirements
Prerequisite | Minimum Requirement |
CPU | 12 Core |
RAM | Linux
16 GB |
Disk Space | Linux
1 TB data disk and 50 GB OS disk |
Network Traffic rules | Outgoing network traffic: CloudCache connects to Druva Cloud using port 443. |
Firewall | If a firewall is enabled, allow all outgoing TCP/IP traffic to port 443 for "*. druva.com ". |
Web proxy | Druva supports the following proxy types:
|
To use CloudCache 3.3-7649 or later, install the following agents on the servers that you want to protect:
Linux RPM version 4.6.1-7433 or later.
If you do not use the recommended agents, the following errors will be displayed:
PHOENIX 146 error for agent.
KeyError 101 error for CloudCache.
CloudCache R3 hardware requirements
Prerequisite | Minimum Requirement |
CPU | 16 Core |
RAM | 12 GB |
Disk Space | 1 TB data disk and 50 GB OS disk |
Network Traffic rules | Outgoing network traffic: CloudCache connects to Druva Cloud using port 443. |
Web proxy | Druva supports the following proxy types:
For more information see:
|
📝 Notes
4K native drives are not supported in the CloudCache R1 environment. We recommend you use 512 native drives for backup.
CloudCache R3 supports 4K native drives.